The 2018 SOAR Seiki Racing 998 TD1R 1/8 Pro Buggy Kit [SSRS9981706-B] is in stock now!!!
MAP $599.99

• Larger satellite differential gears for more tooth contact, tighter gear mesh, and more consistent diff action
• Harder plastic front & rear bulkheads to reduce stripping out the screw holes 
• Softer plastic pill inserts to reduce the chance of cracking and also allow a tighter hinge pin fit for less slop in the suspension 
• Harder plastic lower A-arms for improved handling and softer plastic A-arms available for cold weather racing 
• Redesign rear uprights to survive hard impacts and crashes 
• Redesign front upper arms to survive crashes and hard impacts 
• Redesigned 7079 aluminum chassis to allow more engine adjustment for proper gear mesh with all engine brands
• Black anodized lower pillow balls for longer life
• Redesigned front upper arm outer rod ends and pillow balls for improved strength and suspension movement
• 2mm Longer rear shock shafts for increased suspension down travel
• Reshaped shock caps for improved membrane sealing

• Redesigned HT high traction limited slip differential gear cases for increased acceleration on high traction surfaces
• 5mm Carbon Fiber short front shock tower to provide an extra 2.5mm of suspension down travel
• 4mm Carbon Fiber short rear shock tower to provide 3mm of extra suspension travel
• Hard anodized 7075 aluminum front suspension plates for increased durability
• Front and rear CVD's for increased traction with universals still used for the center for maximum acceleration
• Redesigned front steering blocks for increased durability and to allow the use of CVD's or universals
• Redesigned Carbon Fiber front servo saver support plate to reduce chassis flex and allow an extra 2mm of additional caster adjustment
• Redesigned Carbon Fiber front upper arm mounting plates for increased strength
• Unique 1-piece lite weight adjustable wing mount for a lower center of gravity. Allows for standard height, +3mm, and +6mm for additional downforce on loose tracks
• Small diameter brake caliper bolts with springs for smoother brake pad action and faster release
• 20mm shock spring collars to allow the use of any 20-22mm diameter shock spring
• 20mm lower shock spring perches to allow the use of 20mm diameter shock springs
• 1.6mm/70mm/9T 4.93lbs black front shock springs
• 1.6mm/86mm/10.75T 3.52lbs black rear shock springs
• Ultimate shock bladders for constant rebound for a much more consistent shock feel even on the bumpiest tracks
• Latex shock boots to reduce the chance of tearing 
• Flat head down stop screws to reduce chassis wear 
• Pre-cut TD1R high side bite lite weight lexan body

• 3mm 7079 aluminum chassis
• Carbon Fiber Shock towers
• Carbon fiber front support plate
• Carbon fiber upper arm mounting plates
• Carbon fiber steering arm plates
• 7075 adjustable toe/anti-squat suspension plates
• 7075 ackerman plate
• Vented steel brake rotors with metallic brake pads
• DBS fully adjustable pillow ball V2 suspension system with adjustable front camber/caster/toe
• 7075-T651 16.7mm big-bore shock absorbers
• 1.2x8 hole tapered shock pistons
• 1.6mm wire low frequency black coated shock springs
• 2.3mm front and 2.7mm rear away bars
• Front and Rear CVD drive shafts
• Center Universal drive shafts
• 13/46t lightweight steel clutch bell and spur gear
• 13/44t lightweight ring and pinion gears 
• Aluminum 3-shoe clutch system
• 8x16 High-Speed rubber sealed ball bearings and 5x11 lightweight pinion gear bearings
• Pre-Cut V3 lexan body
• High downforce black plastic wing
• Full wrap for wing and radio tray
• 998 decal sheet